Related Manuals for Yardworks CLM48BCU1
Summary of Contents for Yardworks CLM48BCU1
- Page 1 22˝ (55.9 CM) BRUSHLESS 3-IN-1 SELF-PROPELLED LAWN MOWER model number 060-1982-2 | contact us: 1.866.523.5218 IMPORTANT: Instruction Read and follow all safety rules and operating Manual instructions before using this product.
- Page 2 model no. 060-1982-2 | contact us: 1.866.523.5218 model no. 060-1982-2 | contact us: 1.866.523.5218...
- Page 3 model no. 060-1982-2 | contact us: 1.866.523.5218 Introduction Safety Instructions and Symbols Product Specifications Product Diagram Assembly Operation Maintenance Storage Troubleshooting Exploded View Parts List Warranty...
- Page 4 Congratulations on your purchase of your new Yardworks tool. It has been designed, engineered ® and manufactured to give you the best possible dependability and performance. Should you experience any problem you cannot easily remedy, please contact our Yardworks ® customer service line at 1.866.523.5218.
- Page 5 model no. 060-1982-2 | contact us: 1.866.523.5218 READ ALL INSTRUCTIONS in an indoor dry and locked-up place — out of reach of children. FOR ALL LAWN MOWERS 11) Maintain lawn mower with care — Keep 1) Avoid dangerous environment — Don’t cutting edges sharp and clean for use lawn mowers in damp or wet best and safest performance.
- Page 6 model no. 060-1982-2 | contact us: 1.866.523.5218 model no. 060-1982-2 | contact us: 1.866.523.5218 FOR ALL BATTERY-OPERATED behaviour resulting in fire, explosion or risk GARDENING APPLIANCES: of injury. 1. Prevent unintentional starting. Ensure 8. Do not expose a battery pack or appliance the switch is in the off position before to fire or excessive temperature.
- Page 7 model no. 060-1982-2 | contact us: 1.866.523.5218 d) Do not remove battery pack from its keep battery packs of different original packaging until required for electrochemical systems separate use. from each other. e) Do not subject battery pack to s) Recharge only with the charger mechanical shock.
- Page 8 model no. 060-1982-2 | contact us: 1.866.523.5218 absolutely necessary. Always look caution. If you feel uneasy on a slope, do down and behind before and while not mow it. moving backward. 1. Mow across the face of slopes; never 8. Never direct discharged material toward up and down.
- Page 9 model no. 060-1982-2 | contact us: 1.866.523.5218 4. If you strike a foreign object, stop d) Never attempt to make a wheel height and inspect the machine. Repair, if adjustment while the motor is running. necessary, before starting. e) Mow only in daylight or in good artificial 5.
- Page 10 model no. 060-1982-2 | contact us: 1.866.523.5218 model no. 060-1982-2 | contact us: 1.866.523.5218 SAVE THESE INSTRUCTIONS 1.4 Maintenance a) Check the blade and the motor mounting Information for radiated emission bolts at frequent intervals for proper This device complies with Canadian ICES-001. tightness.
- Page 11 Yardworks has established a partnership with the RBRC Corporation to ® recycle any Yardworks batteries with the RBRC-call2recycle seal. For ® environmental protection, please do not discard batteries in the trash. After the battery’s life cycle is ended, please call 1-800-822-8837 for a free service that will properly dispose of the battery.
- Page 12 model no. 060-1982-2 | contact us: 1.866.523.5218 PRODUCT SPECIFICATIONS Voltage 48 V No load speed 2700/min Deck size 22˝ (55,9 cm) Cutting width 21˝ (53 cm) Cutting height range 1 1/2 – 4˝ (3.8 – 10.2 cm) Collection capacity 60 L (1.7 Bushels) Cutting height positions 7 positions Front wheel diameter...
- Page 13 model no. 060-1982-2 | contact us: 1.866.523.5218 Upper handle Start bar Self-propel engagement bar Upper handle lock knob Lower handle Lower handle lock knob Rear discharge guard Cutting height adjustment lever Battery pack cover 10. Wheel 11. Carry handle 12. Side discharge cover 13.
- Page 14 model no. 060-1982-2 | contact us: 1.866.523.5218 To reduce the risk of injury, user must read instruction manual. Intended Use This product is intended for domestic lawn mowing. • Mowing with grass collection bag attached — Standard lawn mowing with grass collection bag attached.
- Page 15 model no. 060-1982-2 | contact us: 1.866.523.5218 3) Rotate the lower handle lock knob into the aligned holes to lock the lower handle on the deck. (See Fig. A3, A4) 2. ASSEMBLING THE UPPER HANDLE 1) Attach the upper handle onto the outside of the lower handle. Be sure to carefully align the holes found on the lower handle and the upper handle.
- Page 16 model no. 060-1982-2 | contact us: 1.866.523.5218 model no. 060-1982-2 | contact us: 1.866.523.5218 3. GRASS COLLECTION BAG FITTING 1) Raise the rear discharge guard and hold it up; remove the mulching block if it is in the rear chute. (See Fig. C1) 2) Raise the rear discharge guard and hold it up.
- Page 17 model no. 060-1982-2 | contact us: 1.866.523.5218 4. REMOVING / EMPTYING THE GRASS COLLECTION BAG - Removing (See Fig. D) Raise the rear discharge guard and hold it up. Lift the grass collection bag by the handle upwards a little, and then remove the grass collection bag from the rear discharge chute. - Emptying As soon as you see mown grass debris on the lawn, the grass collection bag needs to be emptied.
- Page 18 model no. 060-1982-2 | contact us: 1.866.523.5218 5. ASSEMBLY OF THE SIDE DISCHARGE CHUTE NOTE: The side discharge chute is used to distribute grass clippings from the side of the mower while it is in use. To use this function, the grass collection bag is NOT required to be assembled on the lawn mower.
- Page 19 model no. 060-1982-2 | contact us: 1.866.523.5218 6. ADJUSTING THE CUTTING HEIGHT (SEE FIG. F) NOTE: • Always try to adjust the cutting height of the lawn mower while positioned on the area of grass you plan to mow. • It is recommended to start on a higher setting and mow a trial area of lawn before deciding on the final cutting height position.
- Page 20 model no. 060-1982-2 | contact us: 1.866.523.5218 1. CHARGING THE BATTERY PACK IMPORTANT NOTES FOR CHARGING BATTERY The battery in your new tool is not charged when it leaves the plant. Therefore, it must be full charged before using the first time. NOTE: If the battery pack is very hot you must remove your battery pack from the charger and allow your battery pack to cool first to ambient temperature and then recharging can be started.
- Page 21 model no. 060-1982-2 | contact us: 1.866.523.5218 CHARGING INDICATOR This charger is designed to detect some problems that can arise with battery packs. Indicator lights indicate problems (see table below). Light ON/ Flash Status Defective Battery Red on Battery Temperature Protection. The temperature of battery pack is less than 0 C (32...
- Page 22 model no. 060-1982-2 | contact us: 1.866.523.5218 OPERATION This lawn mower has the option to be manually pushed or motor-driven self-propelled when the motor is running. NOTE: Ensure your battery is charged before use. 1. MANUAL OPERATING NOTE: When starting, ensure the lawn mower is set to the highest height setting so the blades are not resting deep into the grass.
- Page 23 model no. 060-1982-2 | contact us: 1.866.523.5218 3. MOWING TIPS NOTE: Always inspect area where mower is to be used and remove all stones, sticks, wire, metal and other debris which might be thrown by the rotating blade. 1) It is recommended to mow your lawn more frequently, walk at normal pace, and not to start/stop the mower too often during operation.
- Page 24 model no. 060-1982-2 | contact us: 1.866.523.5218 model no. 060-1982-2 | contact us: 1.866.523.5218 Mowing with grass collection bag attached If a grass bag is used during the fast growing season, the grass may tend to clog up at the discharge opening.
- Page 25 model no. 060-1982-2 | contact us: 1.866.523.5218 NOTE: To ensure long and reliable service, perform the following maintenance procedures regularly. Check for obvious defects such as a loose, dislodged or a damaged blade, loose fittings, and worn or damaged components. Check that the covers and guards are all undamaged and are correctly attached to mower.
- Page 26 model no. 060-1982-2 | contact us: 1.866.523.5218 model no. 060-1982-2 | contact us: 1.866.523.5218...
- Page 27 model no. 060-1982-2 | contact us: 1.866.523.5218 Stop the mower. Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water, solvents or polishes. Remove all grass and debris, especially from the ventilation slots. Turn the machine on its side and clean the blade area.
- Page 28 060-1982-2 | contact us: 1.866.523.5218 The following table gives checks and actions that you can perform if your machine does not operate correctly. If these do not identify/remedy the problem, contact Yardworks at 1.866.523.5218. ® Problem Solution Release switch lever to turn mower off. Remove the battery pack. Turn Mower doesn’t run when...
- Page 29 model no. 060-1982-2 | contact us: 1.866.523.5218...
- Page 30 model no. 060-1982-2 | contact us: 1.866.523.5218 Item No. Description QTY. Item No. Description QTY. Battery Cover Round Pin Right Cover Base Right Housing Lifting Handle Battery Pack Front Cover Switch Upper Cover Wheel Hub Button Front Wheel Axle Blade 9500 Switch Strut Motor Axis Guide Switch Strut...
- Page 31 These parts are warranted to the original Made in China. Imported by Yardworks Canada Toronto, Canada M4S 2B8 Always remove or disconnect the battery pack before adjusting, cleaning,...
- Page 32 FCC Part 15 Supplier’s Declaration of Conformity Product Description: Charger Model Number: 060-1990-2 Trade Name: Yardworks ® This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
- Page 37 22” (55.9 cm) Brushless 3-in-1 Self-propelled Lawn Mower model no. 060-1982-2 | contact us: 1.866.523.5218 ASSEMBLY 1. OPENING THE LOWER SHORT HANDLE AND ASSEMBLING THE UPPER HANDLE. 1) Pull and turn the lower handle lock knob (see Fig. A1). Open the lower handles and align the hole on the lower handle with one of the three holes on the deck (see Fig.
- Page 38 22” (55.9 cm) Brushless 3-in-1 Self-propelled Lawn Mower model no. 060-1982-2 | contact us: 1.866.523.5218 2. GRASS COLLECTION BAG FITTING 1) Raise the rear discharge guard and remove the mulching block (see Fig. C1). 2) Pick up the grass collection bag by the handle, and position the left and right hooks of grass collection bag onto the mower (see Fig.
- Page 39 22” (55.9 cm) Brushless 3-in-1 Self-propelled Lawn Mower model no. 060-1982-2 | contact us: 1.866.523.5218 PREPARATION 1. CHARGING PROCEDURE (See Fig. E) 1) Plug the charger into an appropriate outlet. 2) The light will flash green while charging. When fully charged, the light will turn solid green. 2.
- Page 40 22” (55.9 cm) Brushless 3-in-1 Self-propelled Lawn Mower model no. 060-1982-2 | contact us: 1.866.523.5218 OPERATION 1. MANUAL OPERATING 1) Press down the lock off button, then pull ONLY the start bar upward towards the upper handle bar. Keep it in this position to start the mower as well as during use (see Fig. H1). 2) Release the lock off button and start the mower.