Page 3
Platinum Reversible Part Drawing Description Hardware List Right Leg 1 EA Long Socket Screw 4 EA Short Socket Screw 4 EA Flange 2 EA Knob 2 EA Left Leg 1 EA 3” Locking Caster 4 EA Allen Wrench 1 EA Tray 1 EA Caster Wrench...
Platinum Reversible Assembly Diagram Illustration # 1 HROUGH NSTRUCTIONS FROM BEGINNING BEFORE TO END STARTING TO ASSEMBLE UNIT To Assemble: Identify and Separate all the Parts and Hardware. 2. Install Cross bar (P-4) to the Legs (P-1) and (P-2) by using Long Socket Screws (A). Tighten with Allen Wrench (H).
Page 5
Illustration # 3 Detach 2 Screws from each side Screws of Framed Board’s brackets (P-5) with Allen Wrench (H) as shown in illustration # 3. Install Flange (C) on each side of the board using the same Screws from Step 4 and tighten with Allen Wrench (H).
Page 6
Platinum Reversible 6. Separate the Legs (P-1) and (P-2) slightly in order to insert the Flange (C) bolts on sides of Framed Board (P-5) through the flange hole on each legs. Fasten the Knobs (D) to secure the board in place. See illustration # 5. Illustration # 5 7.