Advertisement
9. Press MODE to select DST On/OFF.
10.DST ON will show. Press the + or – button to select DST OFF (unless you live in
Arizona, then select ON).
11.Press MODE to select 12/24 hour time format.
12.12H will show. Press the + or – button if you prefer 24 hour time format.
13.Press MODE to select Hours.
14.The Hour will show. Press the + or – button to adjust the hour.
15.Press MODE to select the Minutes.
16.The Minutes will show. Press the + or – button to adjust the minutes.
17.Press MODE to select the Year.
18.The Year will show. Press the + or – button to adjust the year.
19.Press MODE to select the Month.
20.The Month will show. Press the + or – button to adjust the month.
21.Press MODE to select the Date.
22.The Date will show. Press the + or – button to adjust the date.
23.Press MODE to select Fahrenheit/Celsius.
24.The °F will show. Press the + or – button to select Celsius.
25.Press MODE to confirm and exit.
No WWVB Tower Icon
The digital clock has not received a WWVB time signal in the past 24 hours.
Position
the digital clock for better reception.
Allow up to 5 nights to receive the time signal.
Set Time Alarm
HOUR: Press and hold down the ALARM button for 2 seconds until the Hours
flash. Use the +/- buttons to set the Hour. Press ALARM button to confirm the
setting
MINUTES: The Minute display of the Alarm time starts to flash. Use the +/- to
set the required minute. Press ALARM button to confirm the setting and to end
the setting procedure.
Activate/Deactivate Time Alarm
Hold the ALARM button to enter alarm settings. "AL" will show.
Press and release ALARM to activate/deactivate the alarm.
The bell icon will show when active.
Note: When the alarm sounds, it will continue for two minutes then shut off.
Snooze Alarm
When the alarm sounds, press the SNOOZE button to trigger snooze alarm for
10 minutes.
This crescendo alarm will sound for 120 seconds if not deactivated. Press any
button to stop the alarm for 24 hours.
La Crosse Technology, Ltd
Page 4
Advertisement
