Throttle Control - Triumph Tiger 850 Sport 2020 Owner's Handbook Manual

Models without Daytime Running Lights
(DRL)
Press the high beam button to switch
the high beam on. Each press of the
button will swap between dip and high
beam.
Note
A lighting on/off switch is not installed
on this model. The position light, brake/
tail light and license plate light all
function automatically when the ignition
is turned to the ON position.
The headlight will function when the
ignition is turned on and the engine is
running.
Rider Heated Seat Switch (if
equipped)
The rider heated seat will only heat
when the engine is running. When
the heated seat is switched on the
heated seats symbols will appear in the
instrument display. The selected heat
level will also be indicated by the color
of the symbol.
For more information, see page 88.
General Information

Throttle Control

This Triumph model has an electronic
throttle twist grip to open and close
the throttles via the engine control unit.
There are no direct-acting cables in the
system.
2
1
1. Throttle open position
2. Throttle closed position
3. Cruise control cancel position
The throttle grip has a resistive feel to
it as it is rolled rearwards to open the
throttles. When the grip is released it
will return to the throttle closed position
by its internal return spring and the
throttles will close.
From the closed position, the throttle
twist grip can be rolled forward 0.12–
0.16 in (3–4 mm) to deactivate the cruise
control (if equipped), see page 71.
There are no user adjustments for the
throttle control.
If there is a malfunction with the
throttle control
Indicator Light
illuminated and one of the following
engine conditions may occur:
• MIL illuminated, restricted engine
RPM and throttle movement
3
the Malfunction
(MIL) becomes
33