Maintenance
Headlights Adjustment
The headlights can be adjusted by
means of a vertical adjustment screw
located on the rear of the headlight
unit. There is no horizontal adjustment.
1
1.
Vertical adjustment screw
To adjust the headlight:
•
Switch the headlight dipped beam
on.
•
Turn the vertical adjustment screw
on the headlight unit clockwise to
lower the beam or counterclockwise
to raise the beam.
•
Switch the headlights off when the
beam settings are satisfactory.
Note
There is a small triangle marking on
each side of the headlight unit which
indicates the height of the light within
the
headlight
unit
purposes.
168
for
adjustment
Headlights Replacement
The
headlight
maintenance
free
headlight unit must be replaced in the
event of a failure.
Daytime Running Light (DRL) (if
equipped)
The Daytime Running Light (DRL) is
situated within the headlight assembly
and is a sealed, maintenance free
LED unit. The headlight unit must be
replaced in the event of the failure of
the DRL.
unit
is
a
sealed,
LED
unit.
The