Caliber MCD 260M Manual page 3

5 . B A S I C O P E R AT I O N S
4) PANEL RELEASE BUTTON
Press this button to remove the control panel.
9) POWER ON/OFF BUTTON
Press POWER button or any other button on the front of the radio (except
Open/Eject)to turn the unit on. Press POWER button again to turn the unit off.
21) MODE BUTTON (MODE)
Press MODE button to select a different mode of operation as indicated on the display
panel. Available modes include Tuner and CD (MP3) mode.
5) MUTE BUTTON (MUTE)
Press the mute button momentarily to mute the audio volume, and "Mute on" will be
displayed. Press the mute button again to restore volume to the previous setting.
1-3) VOLUME BUTTONS
To increase the volume, press the volume up button to decrease the volume, press volu-
me down button.
2) SEL BUTTON (SEL)
Press the SEL button, the display will be displayed first option is Volume, followed by
Bass,Treble, Balance, Fader and back to Volume.
When adjusting audio functions, the unit will automatically exit audio control mode
after 5 seconds of inactivity. Use the volume button to adjust the settings.
Press the SEL button for more than 3 seconds, the display will be displayed as cyclical mode of
following functions: TA SEEK or ALARM, MASK DPI or ALL, RETUNE L or S, DSP, LOUD
OFF/ON, ESP 12/45, MULTI ON/OFF, BEEP ON/OFF, SEEK 1/2, STEREO/MONO, DX/LOCAL.
TA SEEK or ALARM
Use the volume up/down button to choose TA ALARM or TA SEEK mode,When TA is
turned on and no traffic program identification code has been received during the spe-
cified time, no TA/TP is displayed and according to the MENU SELECT, alarm is set off,
or TA SEEK is activated.
TA ALARM mode: NO TA/TP is displayed and alarm is set off.
TA SEEK mode:TA SEEK is activated.
MASK DPI or ALL
Use the volume up/down button to choose MASK DPI or MASK ALL mode.
MASK DPI mode: Only the AF which has different program identification is masked.
MASK ALL mode:The AF which has different program identification and NO RDS sig-
nal with high field strength is masked.
RETUNE L or S
The initial time of automatic TA search or PI search mode is selected.When PI infor-
mation is not caught for retune time, the radio start to retune to the next same PI
station.When the same PI station does not catch 1 cyclic search, the radio start to
retune to the next same PI station.
RETUNE L mode: Selected as 90 seconds
RETUNE S mode: Selected as 30 seconds
DSP MODE
Use the volume up/down button to choose DSP sound effect:
POP > ROCK > CLASSIC > FLAT > DSP OFF
LOUD OFF/ON
Reinforce the bass output.
Use the volume up/down button to switch between LOUD ON and LOUD OFF.
ESP 12/45 (Electronic Shock Protectio)
Use the volume up/down button to switch between ESP 12 and ESP 45.
ESP 12: buffer memory from 12 seconds / ESP 45: buffer memory from 45 seconds
MULTI SESSION
Use the volume up/down button to switch between MULTI ON and MULTI OFF.
MULTI OFF: support mixed CD, one session CD
MULTI ON: support mixed, extra, multi session CD
BEEP ON/OFF
Use the volume up/down button to switch between BEEP ON and BEEP OFF.
SEEK 1/2
Use the volume up/down button to switch between SEEK 1 and SEEK 2.
STEREO/MONO
Use the volume up/down button to switch between STEREO and MONO.
DX/LOCAL
Use the volume up/down button to switch between DX and LOCAL.
9) DISPLAY (DISP)
Pressing the "DISP" key will display the following modes;
In case of receiving a RDS station:
Tuner mode PS – FREQ – CLOCK – PTY
CD/MP3 player mode CDP – CT – PS – FREQ – PTY
In case of receiving NON RDS station
Tuner mode FREQ – NO CLOCK – NO PTY
CD/MP3 player mode CDP – FREQ – CT – NO PTY
CLOCK SETTINGS
Press the DISP button for more than 1 second, clock mode switches to clock adjusting
mode and the clock display begins to flash.With the volume up/down buttons you can
change the time clock.
3