1. Manuals
  2. Brands
  3. Caliber Manuals
  4. Car Receiver
  5. MCD 773
  6. Manual

Caliber MCD 773 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1. MUTE / POWER
2. EJECT
3. PANEL RELEASE
4. AUDIO MENU BUTTON / CD, DVD OK. BUTTON
5. MODE
6. ENCODER VOLUME
7. 3,5MM A/V IN JACK
8. SUBWOOFER / TUNER AF
9. 2 ZONE / TUNER TA
10. 1X-BASS / TUNER PTY
11.TUNER PS AS / CD SET-UP / DVD OSD SET-UP
12.TUNER M1 MEMORY 1 / CD PAUSE PLAY / DVD PAUSE PLAY
13.TUNER M2 MEMORY 2 / CD STOP / DVD STOP
14.TUNER M3 MEMORY 3 / CD REPEAT OFF, REPEAT TRACK, REPEAT
DISC / DVD REPEAT OFF, REPEAT CHAPTER, REPEAT TITLE
15.TUNER M4 MEMORY 4 / CD RANDOM FOLDER / DVD SHORT
PRESS M4 --> DVD MENU
16.TUNER M5 MEMORY 5
17.TUNER M6 MEMORY 6 / DVD AUDIO
18. DISPLAY MENU
19.TUNER BAND
20.TUNER SEEK UP TUNE UP / CD FILE/TRACK UP FAST FORWARD /
DVD NEXT FAST FORWARD
21.TUNER SEEK DOWN,TUNE DOWN / CD FILE/TRACK DOWN
FAST BACKWARD / DVD BACK FAST BACKWARD
S P E C I F I C A T I O N S
GENERAL
Power Supply
DC 11 -14,4V
Polarity
Negative Ground
Speaker impedance
4 ohms
Power Output
4 x 70W
DVD / CD PLAYER
Usable disc
DVD+/-R, DVD+/-RW, CD, CD-R,
CD-RW
Sampling frequency
No of quantization bits
Frequency
20-20,000Hz
Number of channels
2 stereo
S/N Ratio
90dB
RADIO SECTION
FM
Frequency Range
87.5-108 Mhz
Usable Sensitivity
Better than 15dB at S/N 30 dB
Stereo Separation
25 dB at 1KHz
S/N Ratio
50 dB
AM / MW
Frequency Range
522-1620 Khz
Usable Sensitivity
Better than 40dB
S/N Ratio
40 dB
REMARK :
Specifications subject to change without notice.
1

Advertisement

Table of Contents
loading

Related Manuals for Caliber MCD 773

Summary of Contents for Caliber MCD 773

  • Page 1 1. MUTE / POWER 2. EJECT 3. PANEL RELEASE 4. AUDIO MENU BUTTON / CD, DVD OK. BUTTON 5. MODE 6. ENCODER VOLUME 7. 3,5MM A/V IN JACK 8. SUBWOOFER / TUNER AF 9. 2 ZONE / TUNER TA 10. 1X-BASS / TUNER PTY 11.TUNER PS AS / CD SET-UP / DVD OSD SET-UP 12.TUNER M1 MEMORY 1 / CD PAUSE PLAY / DVD PAUSE PLAY 13.TUNER M2 MEMORY 2 / CD STOP / DVD STOP...
  • Page 2 D I S C P L AY PRECAUTIONS • Use only in a 12-volt DC negative-ground electrical system. • Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. • When replacing the fuse, be sure to use one with an identical amperage rating. •...
  • Page 3 W I R I N G D I A G R A M - A U D I O / V I D E O C O N N E C T I O N S...
  • Page 4 W I R I N G D I A G R A M - P O W E R / S P E A K E R S ( I S O S M A L L C O N N E C T O R )
  • Page 5 PA N E L O P E N / C L O S E O P E R AT I O N This unit is equipped with the most advanced full logic motorized slide down system.You can enjoy this advance technology with just a single press of the “OPEN”...

  • Page 6: P A N E L F U N C T I O N

    C O N T R O L P A N E L F U N C T I O N...
  • Page 7 R E M O T E F U N C T I O N S...
  • Page 9 B A S I C O P E R AT I O N S 3) PANEL RELEASE BUTTON (REL) Press this button to remove the control panel. 1) POWER ON/OFF BUTTON Long press the POWER button or Short Press any other button on the front of the unit (except the Open/Eject) to turn On the unit.
  • Page 10 DISPLAY / MENU BUTTON This DISPLAY inter-change button can be used to interchange between the 2 types of DISPLAY INTERFACE, the 'Image Display Interface” & 'Big Font Display interface'.This is useful when playing a CD or MP3 or WMA or other music disc and if user prefers to see the CD Track no / MP3 File number and elapse time with bigger numerical fonts, the Big Font Display offers a better read out for the numerical display.
  • Page 11 DATE SET Once in Date Set mode, User can use the Encoder Vol Knob to adjust the Date / Month / Year. Short press the AUDIO button to confirm the entry and move to the next entry. CLOCK The time of the clock is set to 12:00 by default. User can adjust the time by rotate the Encoder Vol knob clockwise to adjust the minute and rotate the Encoder Vol knob anticlockwise to adjust the hour.
  • Page 12 D UA L Z O N E O P E R AT I O N “2-ZONE” DUAL A/V ZONE MULTI ENTERTAINMENT OPERATION: This unit is equipped with the most advanced “Dual A/V Zone” feature.This function is useful if the user would like to select different modes of the Audio and Video (AV) output source for Front and Rear Speakers and TFT Screens.
  • Page 13 Sub-woofer Low Pass Filter (LPF) User has 5 seconds to use the encoder volume knob to select the 4 different Low Pass filter Flat, 80Hz, 120Hz or 160Hz. The Sub-woofer LPF control is only applicable if the unit is equipped with the optional subwoofer line out, and only if the unit is connected to an optional sub-woofer speaker.
  • Page 14 T R E B L E TREBLE (LEVEL) User has 5 seconds to use the encoder volume knob to adjust the desired Treble level range from -6 to +6. TREBLE CFQ (FREQ) User has 5 seconds to use the encoder volume knob to adjust the desired Treble center frequency to 10KHz, 12.5KHz, 15KHz, or 17.5KHz.

  • Page 15: Pty Function

    2.TA FUNCTION By pressing TA button < 3 seconds, to switch on TA standby mode.The TA icon will light up on the LCD. In the stand by mode, when a traffic announcement broadcast starts, the traffic announcement broadcast will be received as top priority regardless of the function mode.When a traffic announcement starts,“TRAFFIC INFO”...
  • Page 16 AUDIO CD OPERATION - REMOTE CONTROL To operates CD function through the following keys on the remote control. PAUSE / PLAY BUTTON STOP NEXT BACK FAST FORWARD & FAST BACKWARD 19~29 NUMERIC BUTTONS REPEAT 10~13 UP/DOWN/LEFT/RIGHT BUTTON OK BUTTON RANDOM BUTTON 17) PAUSE/ PLAY BUTTON ( / M1) 1.
  • Page 17 16)OK BUTTON Use this button to confirm the selection. 7) RANDOM BUTTON RANDOM button less than 3 seconds is “random play” all songs on the disc.To disable all file “ random play”, press RANDOM button less than 3 seconds. AU D I O C D O P E R AT I O N - C O N T RO L PA N E L The following functions are available operated through the control panel.

  • Page 18: Selecting A Track To Play

    M P 3 / W M A O P E R AT I O N MP3/WMA Operation-TFT Monitor When a MP3/WMA disc is inserted into the player and the following picture will appear on the TFT monitor. The player automatically plays the first track.The elapsed time within the track is displayed on the right side of the top line.When the track is finished, the second track will begin playing, and the track number on the top line will be updated.

  • Page 19: Random Button

    14) NEXT( Press NEXT to skip forward to the beginning of the next chapter. 15) BACK( Press BACK to skip backward to the beginning of the previous chapter. 8~9) FAST FORWARD& FAST BACKWARD( 1. Press FAST FORWARD to fast forward through the disc. Each time the button is pressed, a new speed (2X, 4X, 8X or 20X) is selected.
  • Page 20 FILE SELECT Press the TRACK UP (20) or TRACK DOWN (21) button for less than one second to advance to the next file on the CD, The selected track number will appear on the display. Press and Hold TRACK UP (20) or TRACK DOWN (21) button for more than one second to fast forward or fast reverse through the disc.

  • Page 21: Eject Button

    DV D O P E R AT I O N DVD OPERATION - REMOTE CONTROL 2) EJECT BUTTON ( Press the EJECT button to eject the disc or loading the disc. 17)PLAY/PAUSE ( 1. Press PAUSE to pause playback. 2. Press PAUSE to single step forward to the next picture in the video (DVD and VCD only). 3.

  • Page 22: Osd Button

    19 ~29) NUMERIC BUTTONS 1.When playback CD/MP3/WMA use for track number or File number direct access and use when function need numeric Selection or Input, like in the Goto function,etc. 2.When playback DVD use when function need numeric Selection or Input, like in the Goto function,etc 30A) DVD MENU 1.

  • Page 23: Zoom Button

    - Select "Title/Chapter" to jump to the beginning of a specific chapter within a specified title (DVD only) and enter the title and chapter numbers with the number pad and LEFT/RIGHT direction buttons, as follows: - Select "Track" to jump to the beginning of a specific track within a non-DVD disc and enter the track number with the number pad, as follows: 33) ZOOM BUTTON 1.

  • Page 24: Dvd Audio

    38)DVD AUDIO Press DVD AUDIO during playback to change the audio language when playback a DVD disc.The OSD indicates the current setting by giving the audio track number, language, audio type, and number of channels. For example: 1) The first press shows the current language selected; subsequent presses toggle The next audio language 2) Some DVDs allow audio selection change only via the disc menu.
  • Page 25 13.STOP (2 STOP) 1. Press STOP to stop playback and show the logo screen.The player memorizes the location where playback is stopped. 2. Press PLAY to resume playback from the location where playback is stopped (DVD,VCD 1.1,VCD 2.0 and audio CD). 3.

  • Page 26: Memory Card Operation

    11.SET UP (AS/PS) While the DVD disc is being played or under stop mode, the “SET UP” (AS/PS) button on the control panel serve the following function: Long Press “SET UP” (AS/PS) button to bring up the System Setup Menu Please refer to the related description in “system Set Up”...

  • Page 27: D I V X O P E R At I O N

    D I V X O P E R AT I O N The unit is support playback Divx files , the details operation as same as CD/MP3/WMA operation.The following are special functions for playback Divx File: EXTERNAL SUBTITLE External Subtitle setting is used for choosing the language domain, (only for Divx).After selecting one language domain (alphabet), when playback a divx with external subtitle, the subtitle display will use this language alphabet.

  • Page 28: System Setup Menu

    - When trying to play a movie that was not purchased for this player (with the registration code above), the following screen will be displayed: - When trying to play a limited views movie (rental), the following screen will be displayed: A limited views management limits the number of times a user can view the rented movie.
  • Page 29 The LEFT/RIGHT direction buttons are used to select the category of settings to be changed.To change a category, press OK and the page of settings for that category will be displayed.When the category changes are set, press UP repeatedly to return to the text buttons.

  • Page 30: Divx Subtitle

    6.DIVX SUBTITLE Divx Subtitle setting is used for choosing the language domain, (only for Divx). After select one language domain (alphabet), when playback a divx with Divx subtitle, the subtitle display will use this language alphabet. if you find the displaying subtitle “words”...

  • Page 31: Digital Output Setting

    Audio settings. DIGITAL OUTPUT SETTING (*This option is not available for MCD 773) Selecting the Digital Output setting allows the user to adjust the audio output on S/PDIF ports to work in harmony with the audio equipment (e.g.
  • Page 32 2. Use the UP/DOWN direction buttons to select the setting to be changed.The following subsections explain how to change each of the player's Rating settings. PASSWORD SELECTION TO LOCK AND UNLOCK THE PARENTAL CONTROL RATING Selecting the Password Setting:Allows the user to enter a password, to lock and unlock the parental control rating setting into the player.The following options are available: (Unlocked) = The parental control is unlocked and may be changed in the Rating selection...
  • Page 33 S P E C I F I C AT I O N TFT SCREEN SECTION Screen Size: 3.5"(Measured Diagonally) Screen Type:TFT Liquid Crystal Display active matrix Resolution: 960 (W) x 324 (H) DVD / CD SECTION Compatible Disc/Format See “ Disc Note” for more details description Signal to Noise Ratio >...

  • Page 34: Troubleshooting

    T RO U B L E S H O OT I N G Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer.

Table of Contents