Enclosure; Technical Data - Helios FU-BS Series Installation And Operating Specification

Frequency inverter with integrated sine filter for 3 fans
Hide thumbs Also See for FU-BS Series:
Table of Contents

Advertisement

Available languages

Available languages

Installation and Operating Specification FU Basic
Code
de-energized, 13 -
17
14 interrupted

8 Enclosure

8.1

Technical data

Type
(Part-No.)
FU-BS 2,5
(05459-001)
FU-BS 5,0
(05460-001)
FU-BS 8,0
(05461-001)
FU-BS 10
(05462-001)
FU-BS 14/16
(05463-002)
{1} Rated current output
{2} At rated voltage (cos φ 0.8 at the output), values for different specifications on request.
{3} Max. supply side line fuse according to EN 60204-1 classification VDE0113 chapter 1.
Line voltage*
Nominal voltage
Maximal output voltage
Maximal output frequency
Edgefrequency
U/f-characteristic curve
Switching frequency
Rampup time
Rampdown time
Current limit
Power factor
Input resistance for speed setting
signal
Digital input "D1"
Voltage supply for external devices
L-BAL-E187-GB 1703 Index 002
Relay
K1
Overload fault
The controller was switched off by the
current limitation.
Rated current
Rated tempera-
Output
{1}
[A]
2.5
5.0
8.0
10.0
16.0
current indication rating plate @ rated voltage, @ rated temperature (cos φ 0.8 at the output).
3 ~ 208...480 V (-15 up to +10 %), 50/60 Hz
400 V
approx. 95 % from U
50 Hz
48.5 Hz
square
16 kHz
20 sec
20 sec
120 %
> 0.9
for 0... 10 V input: R
for 0...20 mA input: R
Input resistance: R
Voltage range high level: 10....30 V DC
Voltage range low level: 0....4 V DC
+24 V ± 20 %, I
Explanation
max. line fuse
ture
{2}
[A]
[°C]
40
6
55
10
40
10
55
16
40
20
Line
> 100 kΩ
i
= 100 Ω
i
approx. 4 kΩ
i
70 mA
max
Part.-No.
17/22
Reaction of device
Adjustment
The error is set after detecting 4 times
2
(I
t-process; maximum overload applied
for 60 s).
After every detection (IGTB Recovery
Flag is set) there is a 30 s wait until a
new attempt is started.
The respective errors must alway have a
shorter interval than 5 minutes (started
after restart). The modulation is switched
off immediately after every detection.
Check load of the device.
Reset by enable or line voltage ON/OFF.
max. heat dissi-
pation
{3}
[W]
50
90
140
200
360
Enclosure
Weight
[kg]
2.7
5.4
6.3
6.8
7.0

Advertisement

Table of Contents
loading

Table of Contents