Product Overview - Adamson CS Series User Manual

S E R I E S

Product Overview

The CS10p is an sub-compact, powered, intelligent, point source enclosure. It contains two symmetrically arrayed 10" LF
transducers, and a 3" HF compression driver mounted onto an Adamson waveguide.
The CS10p is available in two high frequency waveguide configurations, with dispersion patterns of either 70° x 40° (HxV) or
100° x 50° (HxV) each rotateable in increments of 90°.
Each CS10p cabinet houses proprietary Class-D Amplification and comprehensive internal signal processing including Milan-
ready AVB connectivity. Internal switch fabric allowing multiple enclosures to be daisy-chained in order to reduce the amount of
cabling needed in complex system setups.
The operational frequency range of the CS10p is 60Hz to 18kHz. The use of proprietary techologies such as Advanced Cone
Architecture allows high maximum SPL.
The enclosure is made of marine grade birch plywood, has an inset steel pole mount, and steel rigging discs on the top of the
cabinet as well as on each side to be used with a wide variety of rigging accessories. Without sacrificing low resonance to
composite material, the CS10p weighs only 30 kg / 66.5 lbs
The CS10p is intended to be used as a standalone system or with other CS-Series products and is designed to pair easily and
coherently with all CS-Series subwoofers.
User Manual
6