Product Overview - Adamson CS Series User Manual

S E R I E S

Product Overview

The CS10n is a sub-compact, powered, intelligent, line array enclosure designed for extended throw applications. It contains
two symmetrically arrayed 10" LF transducers, and a 4" HF compression driver mounted onto an Adamson waveguide. The
high frequency waveguide is designed to couple multiple cabinets across the entire intended frequency band without loss of
coherence.
Each CS10n houses proprietary Class-D amplification and comprehensive internal signal processing including Milan-ready AVB
connectivity. Internal switch fabric allowing multiple enclosures to be daisy-chained in order to reduce the amount of cabling
needed in complex system setups.
The operational frequency range of the CS10n is 60Hz to 18kHz. The use of proprietary technologies such as Controlled
Summation Technology and Advanced Cone Architecture allows high maximum SPL and maintains a consistent nominal
horizontal dispersion pattern of 80° down to below 600Hz.
The enclosure is made of marine grade birch plywood with an integrated aluminum and steel four-point rigging system. Without
sacrificing low resonance to composite material, the CS10n weighs only 31 kg / 68.4 lbs
Up to twenty CS10n can be flown in the same array when using the Sub-Compact Support Frame (930-0020). Nine rigging
positions available, allowing vertical inter-cabinet splay angles of 0° to 10°. Always consult Adamson CS Software and the CS-
Series Line Array Rigging Manual for correct rigging positions and proper rigging instructions.
The CS10n is intended to be used as a standalone system or with other CS-Series products. The CS10n is designed to pair easily
and coherently with all CS-Series subwoofers.
User Manual
6