Test Equipment - Motorola EX500 Basic Service Manual

3-40

3.18 Test Equipment

Table 3-5 lists test equipment required to service the EX500, EX600, EX560•XLS and EX600•XLS
radios and other two-way radios.
Motorola Part No.
R2000, R2400,
or R2001 with
trunking option
*R1049
*S1100
*S1053,
*SKN6009,
*SKN6001
R1053
*S1350, *ST1215
(VHF)
*ST1223 (UHF)
*T1013
S1339
*R1013
S1347 or
S1348 (prog)
Table 3-5 Recommended Test Equipment
Description
Service Monitor This monitor will
substitute for items with
an asterisk *
Digital Multimeter
Audio Oscillator 67 to 200Hz tones
AC Voltmeter, 1 mV to 300 V,
Power Cable for 10 Megaohm input
meter, Test leads impedance
for meter
Dual-trace 20 MHz bandwidth,
Oscilloscope
Wattmeter, 50-Ohm, ±5% accuracy
Plug-in Elements 10 W, max. 0-1000
(VHF & UHF), RF MHz, 300 W
Dummy Load
100 μV to 3 VRF, 10
RF Millivolt Meter
kHz to 1.2 GHz
SINAD Meter
DC Power Supply 0-20 Vdc, 0-5 Amps
Characteristics
5 mV/cm - 20 V/cm
Test Equipment
Application
Frequency/deviation meter
and signal generator for
wide-range troubleshooting
and alignment
Two meters recommended
for AC/DC voltage and
current measurements
Used with service monitor for
injection of PL tones
Audio voltage measurements
Waveform measurements
Transmitter power output
measurements
RF level measurements
Receiver sensitivity
measurements
Bench supply for 7.5Vdc