Operation By External Signal - Panasonic UD40 Series User Manual

5) Operation of device

5. Operation by external signal

UD40 controller can be controlled by external devices by sending signals into "External I/O" connector on the back
side of control unit.
1. Pin-out and descriptions for External I/O connector (D-Sub37)
Pin No. I/O Signal name
1 Local / remote switching
2 LED - 1 lighting
3 Program No. change pulse
4 Program No. bit - 0
5 Program No. bit - 1
6 Program No. bit - 2
7 Program No. bit - 3
8 Program No. bit - 4
9 LED - 1 - 1 ON
10 LED - 1 - 2 ON
11 LED - 1 - 3 ON
12 LED - 1 - 4 ON
13 LED - 1 - 5 ON
14 LED - 1 - 6 ON
15 Reserve input - 1
16 Reserve input - 2
17 External emergency stop - 1
18 External emergency stop - 2
19 Common input
20 LED - 2 lighting
21 LED - 2 - 1 ON
22 LED - 2 - 2 ON
23 LED - 2 - 3 ON
24 LED - 2 - 4 ON
25 LED - 2 - 5 ON
26 LED - 2 - 6 ON
27-28 NC
*1 Shorted with common input
*2 One-shot pulse with 0.3sec or longer shorting with common input
*3 Depending on the connected LED head configuration, some pins may be disabled. (See P.41)
Content
Enable external signal control (remote control) when ON
Light LED head - 1 under selected program conditions when ON
Modify program No. by one-shot ON
Designate LED lighting program No.
Set program No. with total of 5 bits (32 ways).
Set program contents from touch screen.
Light block 1 of LED head -1 when ON
*3
Light block 2 of LED head -1 when ON
*3
Light block 3 of LED head -1 when ON
*3
Light block 4 of LED head -1 when ON
*3
Light block 5 of LED head -1 when ON
*3
Light block 6 of LED head -1 when ON
Reserve input
Reserve input
Device goes to emergency stop when OPEN.
(Dry contacts independent from other signals must be used for his
signal.)
Common for Nos. 1 to 16 and Nos.20 to 26 signals (for input)
*3
Light LED head - 2 under selected program conditions when ON
*3
Light block 1 of LED head -2 when ON
*3
Light block 2 of LED head -2 when ON
*3
Light block 3 of LED head -2 when ON
*3
Light block 4 of LED head -2 when ON
*3
Light block 5 of LED head -2 when ON
*3
Light block 6 of LED head -2 when ON
Not connected. (not used.)
- 39 -
*1
*2
signal.
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1