Table of Contents
Advertisement
•
For 4420A setup and configuration, a computer running Macintosh OS X
or Windows 10 operating system
•
Genelec Smart IP Manager software
•
Dante Controller software
Example of powering the 4420A with a PoE+ enabled IP switch. With this
method, the power budget available for all outputs connected to the IP switch
must enable each 4420A to run at full PoE+ power. For 4 loudspeakers, the
power supply must support 4 x PoE+ power level.
Example of powering the 4420A with a PoE+ power injector. This method
enables the use of standard non-PoE IP switches. Each power injector must
support full PoE+ power level into the device.
Advertisement
Table of Contents
Need help?
Do you have a question about the 4420A and is the answer not in the manual?
Questions and answers