Getting Started; Charging The Battery; Performing The Initial Start-Up - Mio Cyclo 100 Quick Start Manual

Hide thumbs Also See for Cyclo 100:

Table of Contents

Available languages

Getting started

Your device has an internal battery that may not be fully charged when you purchase it. You should

charge the battery for at least 3.5 hours before you start using it for the very first time.

To charge the battery:

• Using a mains power socket

Plug the home charger cable into the USB

connector on the back of your device and the

mains power charger into the power socket.

1. Instructions on how to mount the device and accessories on to a bike can be found at the start of

this guide.

2. Press and hold POWER for 2 seconds to turn your device on.

3. Follow the prompts to personalise your device, including:

• select your preferred language

• select the coordination format: degree or degree/minute/second

• select the units format: imperial or metric

• set up date and time format, including the correct time zone and daylight saving function

• set up your profile, including gender, birthday, weight, height, and workout level

• select your bike type (race, city, or mountain) and complete the bike's data (weight and

wheel size)

Tip: You will only have to do this the first time you use the device. You can change these settings from

the SETTINGS menu while using the device.

4. Once your device is turned on, it will search for satellite signals automatically. This may take

several seconds depending on the location. When GPS is fixed, the GPS signal icon (

screen indicates the GPS status.

• Via the computer

Connect your device to the computer by

using the provided USB cable.

For more information, see the "Connecting

your device to the computer" section.

) on the

Table of Contents