Manual Cleaning; Automatic Cleaning - Bissell CleanView Connect Manual

Connecting to the App (cont.)
6
The QR code needed for setup can be
found by removing the Dirt Bin and
turning the robot over.

Manual Cleaning

1
Press the Power Switch
to the ON (I) position.

Automatic Cleaning

You can designate a day and time for your robot to run automatically using the BISSELL
Connect App. Once the robot is connected to the app, go to the Schedule tab and follow
the on-screen prompts.
4
BISSELL.eu
Scan
Code
2
Press the Start/Pause
Button on the top of the
robot to start cleaning.
When finished, press the
Start/Pause Button again
to stop the robot.
7
Once you locate and scan the QR
code, follow the instructions in the app
to pair.
3
To return the robot to
the dock, press the
Start/Pause Button
twice. The button will
flash white as it finds its
way back to the dock.