Connections - Sony CPF-IX001 M-Crew Operating Instructions Manual

Connections

Connecting your personal computer with a system stereo component
Use the supplied PC connecting adaptor, USB cable, and optical digital connecting
cable to connect your personal computer with a system stereo component.
The diagram below shows an example of the MDS-PC3 connected with a computer.
MDS-PC3
To the
optical
digital audio
input jack
Optical digital
connecting
cable
To the DIGITAL
OUT jack
To an analog
audio input jack
Notes
• Make sure each plug is straight when you insert it. Inserting it at an angle may
damage the connector parts.
• Connect the USB connector directly to the computer's USB port with the
supplied USB cable. If you connect the two units via a USB hub, the computer
may not be able to control the connected system component or the sound may
not be output properly.
With the plug correctly oriented,
insert it fully into the jack.
To the PC LINK
jack
PC connecting
adaptor
To the computer's
USB port
USB cable
Make sure to connect
the PC connecting
adapter directly to
To the USB
your computer. Do
connector
not connect via a USB
hub.
Computer
7 GB