Table of Contents
Advertisement
Available languages
Available languages
CAUTION:
Be sure to store this machine
indoors and place it on a flat surface. Otherwise,
the machine may fall and cause an injury.
Replacing the mower blade
CAUTION:
Do not use any wrench other than
the standard hex wrench when replacing the
mower blade. Using a different wrench may lead to
over-tightening or looseness, which may cause injury.
1.
Unplug the extension cord and stand up the
machine. (Refer to the instructions for storing.)
2.
Insert the pin into the hole, and then hold the han-
dle with one hand and loosen the bolt with the wrench
counterclockwise.
► Fig.45: 1. Blade 2. Wrench 3. Pin
3.
Remove the mower blade.
For ELM4121
Remove the bolt, washer, mower blade, bracket, and
spacer in order.
► Fig.46: 1. Spacer 2. Bracket 3. Mower blade
4. Washer 5. Bolt
For ELM4620/ELM4621
Remove the bolt, mower blade, and bracket in order.
► Fig.47: 1. Bracket 2. Mower blade 3. Bolt
4.
Attach a new mower blade, then insert the pin into
the hole, and then hold the handle with one hand and
tighten the bolt with the wrench clockwise firmly.
► Fig.48: 1. Mower blade 2. Wrench 3. Pin
Adjustment of cable
For ELM4621
If the rear wheels do not rotate or do not rotate smoothly
when you squeeze the drive lever, adjust the length of
the cable.
1.
Loosen the nut with a wrench while holding the
sleeve with another wrench.
► Fig.49: 1. Sleeve 2. Nut
2.
Rotate the sleeve.
► Fig.50: 1. Sleeve
3.
Rotate the nut until the nut reaches the sleeve.
► Fig.51: 1. Sleeve 2. Nut
4.
Tighten the nut with a wrench while holding the
sleeve with another wrench.
► Fig.52: 1. Sleeve 2. Nut
5.
Turn on the machine and check that the rear
wheels rotate smoothly when you squeeze the drive
lever.
If the rear wheels do not rotate smoothly, adjust the
length of the cable again.
Extension cord
You should only use extension cords for outdoor use,
PVC or rubber cord ordinary duty with a cross sectional
area not less than 1.5 mm
Before and during use, check the supply and extension
cords for damage. Do not use the appliance if the cord
is damaged or worn. Keep extension cord away from
cutting elements. If the cord is damaged during use,
disconnect the cord from the supply immediately. Do not
touch the cord before disconnecting the supply.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Mower blade
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
16 ENGLISH
2
.
Advertisement
Table of Contents
