Table of Contents
Advertisement
Replacing the mower blade
CAUTION:
Do not use any wrench other than
the standard hex wrench when replacing the
mower blade. Using a different wrench may lead to
over-tightening or looseness, which may cause injury.
1.
Remove the battery cartridge from the mower.
Store it in a safe place out of the reach of children.
2.
Fold down the handle and turn over the machine.
Fig.21
3.
Insert the lock pin through the hole in the bottom
plate and insert it into the hole in the main body.
1
Fig.22
► 1. Bottom plate 2. Lock pin 3. Hole
4.
Use the hex wrench to loosen the hexagonal bolt.
1
Fig.23
► 1. Hexagonal bolt 2. Lock pin 3. Hex wrench
2
3
2
3
12 ENGLISH
5.
Loosen the two hexagonal bolts securing the
bottom plate, and remove the bottom plate.
1
Fig.24
► 1. Bottom plate 2. Hexagonal bolt
6.
Remove the hexagonal bolt, outer flange, and
mower blade.
Fig.25
► 1. Hexagonal bolt 2. Outer flange 3. Mower blade
7.
Place the new mower blade, outer flange, and
hexagonal bolt, and then temporarily tighten the hexag-
onal bolt. Make sure that the arrow on the bottom plate
and the arrow on the mower blade are both pointing in
the same direction.
Fig.26
► 1. Hexagonal bolt 2. Outer flange 3. Mower blade
2
1
2
3
1
2
3
Advertisement
Table of Contents
