Input - KETRON SD40 Instruction Manual

Hide thumbs Also See for SD40:
Table of Contents

Advertisement

Micro 2 / Guitar
When you press from general MENU the
may adjust the settings of the second analogical audio input of the instrument that may be a microphone input
(Micro2) or guitar input (GUITAR).
Here again the page is subdivided into 2 sections: the first is
GUITAR
the second is
modes cannot be enabled together so that you may either use the input as a second microphone input or as a guitar
input. When you enable MICRO2 therefore, GUITAR mode is automatically disabled and vice versa.
All the parameters of
feature is the key FX BYPASS which you may use to quickly disable the effect.
In this section we also find a very useful Guitar Tuner to tune your guitar without use external devices. The Guitar
Tuner can operate in two modes: Tone Generator or Tuner detection.
In this mode by tapping on the virtual strings represented by the display you can hear the notes produced by MJPRO
https://www.ketron.it/images/ketron/Manuali_HTML/SD40/english/32_input.html[13/05/2020 17:07:46]
MIC2/GUITAR
and is for the guitar effect settings. Considering that this is a single audio input, the
MICRO2
mode are exactly the same as those of

Input

tab on the panel, you enter a page where you
MICRO2
and is for the microphone settings while
MICRO 1
mode. The only extra

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents