How To Ride; How To Stop - Razor Power A2 Manual

Folding electric scooter

Hide thumbs Also See for Power A2:

Available languages

HOW TO RIDE

Do not activate the thumb throttle unless you are on the Power A2 and in a safe, outdoor environment

suitable for riding.

Put kickstand up.

Press the power button (A), the LED will light up.

Get on the scooter and place both hands on the handlebars. Kick to start (B), and then push the thumb

throttle (C).

For controlled stops, apply the brake by pressure on the rear-fender brake. Razor recommends that you

practice applying the brake at various speeds and in an open area free from obstructions before riding

your scooter around others.

NOTE: Electric scooter must

be moving at least 5 km/h (3

mph) while engaging throttle

to engage motor.

NOTE: As an additional safety

feature, the scooter is designed

to cut power to the motor

when brake is applied.

NOTE: Motor will re-engage,

(without having to kick to start),

if brake is released and throttle

is applied before scooter

has slowed down to under

5 km/h (3 mph).

NOTE: Practice riding only in

wide open areas clear from

curbs, parking blocks and

other obstacles. Impacting

the wheels against any hard

surface can damage the

wheels. Wheels are not covered

under the limited warranty.