Programming The Sound Bar - Vizio Elevate P514a-H6 User Manual

You can program your sound bar to accept TV remote IR commands.
• Press the SETUP button on the remote, then use the Up/Down buttons to navigate to Prg Remote.
• Use the Next/Previous buttons to toggle through Learn Vol -, Learn Vol +, and Learn Mute.
Function
Learn Volume Down
Learn Vol-
Learn Volume Up
Learn Vol+
Learn Mute
Learn Mute
Point both the sound bar and TV
remotes towards the front of the
sound bar when programming.
LED Behavior
Press the OK button to put the sound bar into learning mode. While the sound bar is in
Waiting to learn:
learning mode, press the Volume Down button on the TV remote control.
Flash from bottom
to top and back
continuously.
Press the OK button to put the sound bar into learning mode. While the sound bar is in
learning mode, press the Volume Up button on the TV remote control.
Learning confirmed:
All of the LEDs will
Press the OK button to put the sound bar into learning mode. While the sound bar is in
blink twice.
learning mode, press the Mute button on the TV remote control.

Programming the Sound Bar

Description
Turn off your TV speakers when
programming your sound bar.
ENG - 25