Operation; Normal Mode; Error Display - Pilz PSEN cs5.1 M12/8 Operating Manual

PSEN cs5.1 M12/8

Operation

Status indicators:
Legend

Normal mode

Device
Safety Gate
Input

Error display

Device
red
red
yellow
Operating Manual PSEN cs5.1 M12/8
1003419-EN-06
NOTICE
The safety function should be checked after initial commissioning and each
time the plant/machine is changed. The safety functions may only be
checked by qualified personnel.
LED off
LED on
LED flashes (500 ms on, 500 ms off)
LED flashes quickly (50 ms on, 950 ms off)
LED status
Green
yellow
Off
yellow
Off
LED status
Safety Gate Input
Off Off
yellow yellow
Display not Display not
definitive definitive
Switch status
Ready for operation
Actuator is within the response range
Actuator is outside the response range
Both safety inputs are high
Both safety inputs are low
Switch status
Internal error on
switch
Supply voltage is
outside the toler-
ance range
Supply voltage is at
the limit of the toler-
ance range
Remedy / measure
Change the switch.
Ensure the voltage supply
corresponds to the Tech-
nical details [ 33].
Ensure the voltage supply
corresponds to the Tech-
nical details [ 33].
30