Philips HD925 Series User Manual page 21

Problem
The Airfryer does not
switch on.
I see some peeling
off spots inside my
Airfryer.
White smoke comes
out of the appliance.
My display shows "E1". The device is broken/defect.
Possible cause
The amount of ingredients in
the basket is too big.
Certain types of ingredients
need to be shaken halfway
through the cooking time.
The appliance is not plugged
in.
Several appliances are
connected to one outlet.
Some small spots can
appear inside the pan of the
Airfryer due to the incidental
touching or scratching of the
coating (e.g. during cleaning
with harsh cleaning tools
and/or while inserting the
basket).
You are cooking fatty
ingredients.
The pan still contains greasy
residues from previous use.
Breading or coating did not
adhere properly to the food.
Marinade, liquid or meat
juices are splattering in the
rendered fat or grease.
Solution
Follow the instructions on page 17 in this
user manual to prepare home-made fries.
Follow the instructions on page 17 in this
user manual to prepare home-made fries.
Check if the plug is inserted in the wall outlet
properly.
The Airfryer has a high wattage. Try a different
outlet and check the fuses.
You can prevent damage by lowering the basket
into the pan properly. If you insert the basket at
an angle, its side may knock against the wall of
the pan, causing small pieces of coating to chip
off. If this occurs, please be informed that this is
not harmful as all materials used are food-safe.
Carefully pour off any excess oil or fat from the
pan and then continue cooking.
White smoke is caused by greasy residues
heating up in the pan. Always clean the pan and
the basket thoroughly after every use.
Tiny pieces of airborne breading can cause
white smoke. Firmly press breading or coating to
food to ensure it sticks.
Pat food dry before placing it in the basket.
Call the Philips service hot line or contact the
Consumer Care Center in your country.
ENGLISH 21