Nice/River Configuration; Configuration Checklist; Configuration Procedure For Dvrs - Siemens DMS8000 MP4 Series Installation, Configuration And Operations Manual

3.5

NICE/RIVER configuration

3.5.1

Configuration checklist

3.5.2

Configuration procedure for DVRs

8
Building Technologies
Fire Safety & Security Products
Verify that you have satisfied the items needed in the first checklist before proceed-
ing to the configuration procedure that follows.
ITEMS NEEDED FOR CONFIGURATION

The NR Video driver installed and configured under the Video Network Manager
in Composer

The DVR IP address

The camera connections

Plug-ins needed:
Plug-ins 258501 (NR driver) and 358201 (NICE/RIVER ST), which must be
–
installed before you can configure your system
The following is the configuration procedure for a DVR unit:
Adding a folder
 Optionally, create a folder for the DVR unit.
Adding the DVR node
1. Select the new folder.
2. Click the Video menu
3. Select the NICE Recorder icon
DVR.
Configuring the DVR IP address
1. Select the new DVR node and click the Node tab.
Note: By default, the node will be named 'Nice Recorder #nn' or 'River Re-
corder #nn'. In the Node tab, you can customise the Description text.
2 In the Setting section, enter the IP address,
which should match the value locally set in the DVR unit.
Linking the DVR node
1. Expand the node structure including the NR Video Driver:
Supervisor System Settings  MM8000 System  Physical configuration
 <Station name>  Video Network Manager
2 Select the DVR node.
3. Drag and drop the link to the Video Driver.
Connecting the cameras
1. Select and expand the DVR node.
2. Select and expand the Video-in folder.
3. Add the required video inputs by clicking the Video In icon
.
or RIVER Recorder icon
048_DMS_MM8000_NICE_Add-On_MP4.30_A6V10097205_a_en.doc
Configuration
to add the
.
06.2010