Fast Filling Device (Optional Equipment) - Hardi COMMANDER Classic DELTA Instruction Book

5 - Operation
The Suction Filling Device is operated as follows:
1. Remove cover (A), and connect suction hose (B) to Suction
Manifold.
2. Engage diaphragm pump and set P.T.O. revolutions at 540 r/min
or 1000 r/min (depending on pump model).
3. Turn handle on Suction Manifold towards Filling Device.
4. The tank is now filled with water. Keep an eye on the liquid level
indicator.
5. Turn handle on Suction Manifold away from Filling Device to
discontinue filling process. Then disengage pump.
6. Disconnect suction tube (B) and replace cover.
ATTENTION! Observe local legislation regarding use of filling device. In some areas it is prohibited to fill from open
water reservoirs (lakes, rivers etc.). It is recommended only to fill from closed reservoirs (mobile water tanks etc.) to
avoid contamination.
WARNING! If suction hose/filter is carried on the sprayer during spraying, it can be contaminated by spray drift
which will be transferred to lake/river when filling!

Fast filling device (optional equipment)

Grip positions used:
The Fast Filling Device is operated as follows:
1. Ensure spray liquid tank contains at least 50 litres of water.
2. Remove cover (A) and connect suction hose (B).
3. Turn handle on Pressure Manifold towards Fast Filler. With the
P.T.O. at 540 r/min the pressure gauge should indicate about 10 bar.
4. If water is not seen in the transfer tube, prime by turning valve (C).
5. Keep an eye on the liquid level indicator.
6. Turn handle on Pressure Manifold away from Fast Filler to disconti-
nue filling process.
7. Disconnect suction tube (B) and replace cover (A).
5.4