Table of Contents
Advertisement
4 - Sprayer setup
Road safety kit
Connect plug for rear lights to the tractor's 7-pin socket, and check function of rear lights, stop lights and direction indi-
cators on both sides before driving.
The wiring is in accordance with ISO 1724. See section in "Technical specifications".
Before transport on public roads the front warning boards with position lamps must be folded out (fitted in certain coun-
tries only).
Pendulum lock setup on LPY model
When having a LPY-model of the sprayer, there is no hydraulic con-
trol unit as tractors hydraulic levers are used. So to control the pen-
dulum lock then one switch on the spray control unit is used. Place
the "pendulum lock" label on the control unit box. This label are pla-
ced on the sign originally meant for End nozzle. Wire connection
should also be done accordingly to diagram - see "Technical specifi-
cations"
4.10
Advertisement
Table of Contents
