Table of Contents
Advertisement
Liquid system
Filling of water
Tank should normally be filled 1/3 with water before adding chemi-
cals. Always follow instructions given on the chemical container!
WARNING! If the sprayer is put aside with liquid in the main tank all MANIFOLD valves must be closed.
Filling through tank lid
Water is filled into the tank by removing the tank lid located at front
of sprayer tank which is accessible from platform. It is recommended
to use as clean water as possible for spraying purposes. Always fill
water through the strainer basket to prevent foreign particles from
entering the tank. An overhead tank can be used in order to obtain
high filling capacity.
WARNING! Do not let the filling hose enter the tank. Keep it outside the tank, pointing towards the filling hole. If
the hose is lead into the tank and the water pressure drops at the water supply plant, chemicals may be syphoned
back and contaminate the water supply lines, plant and well.
Suction filling device (optional equipment)
Grip positions used:
DANGER! Avoid contamination or personal injury. Do not open suction valve towards Suction Filling Device unless
pump is running and filling hose is connected. If this valve is opened without pump running, liquid will stream out
of the MANIFOLD.
5 - Operation
1/3
5.3
Advertisement
Table of Contents
