Table of Contents
Advertisement
3 - Description
HARDI FILLER
The HARDI FILLER is situated in the working zone on the sprayers left
side, just behind the MANIFOLD valves. When being used it should
be folded down by grabbing the handle and pulling it against your-
self and down.
Open the valve in the bottom (A) to empty the FILLER. The valve (C)
engages the HARDI FILLER flushing device, used when mixing the
chemicals. The grip (B) are used for rinsing of the FILLER or chemical
container cleaning.
Control unit
The system is based on EVC - Electrical Valve Control. The on/off is linked to the section valves, which is resulting in a very
quick response to on/off. The operating unit is constructed of modules and is electrically controlled via a remote control
box.
The built-in HARDI-MATIC ensures a constant volume per hectare of the liquid (l/ha) at varying forward speed within the
same gear when the number of P.T.O. revolutions are between 300-600 r.p.m. (pump 540 r.p.m) or 650-1100 r.p.m. (pump
1000 r.p.m.).
EVC control unit
EVC - Electrical Valve Control. The ON/OFF is linked to the section valves, which results in a very quick response to
ON/OFF. The operating unit is constructed of modules and is electrically controlled via a remote control box. The unit is fit
with build-in HARDI MATIC.
3.8
Advertisement
Table of Contents
