Maintenance And Cleaning Of The Pump - Westfalia 82 06 86 Instruction Manual

Maintenance and Cleaning of the Pump

For optimum performance of the pump and depending on the water contamination
and calcification, you have to wash the pump occasionally with warm water.
1. Disconnect the pump from the pipe.
2. Open the filter cover (4) by levering it from the bottom side. Use a screwdriver
or similar and carefully open the cover. Please do not use force while disas-
sembling or assembling the pump. The parts are very fragile and can break
easily.
3. Use pliers or similar to pull out the cover of the impeller (3) and than pull out
the magnetic impeller (2).
4. Take off both foam filters (1) from the sides and wash thoroughly.
5. Clean all parts thoroughly and assemble the pump in reverse order. Now the
pump is ready for use again.
6. With the switch (5) you can adjust the water delivery rate. Turn the switch
either clockwise up to the end or counter clockwise to adjust the water flow.
Using
10