Before First Use; Assembly - Westfalia 82 06 86 Instruction Manual

Before first Use

Dispose of packaging material or store it in a safe place. There is risk of
suffocation for small children!

Assembly

1. Set up the steel frame (1) in the desired place on an even, solid surface.
Please keep in mind that some water may splash over the rim of a bowl, do
not set up the cascade fountain on a surface which may be damaged by
water.
2. Place the bowls on the frame. Place
the bowls in such a way that the spouts
empty into the next lower bowls.
3. Lead the water hose (4) on the
terracotta jug from below. Lead the
water hose if desired through the small
wire rings on the steel frame (see red
rings on the picture).
4. Set the lower end of the water hose
onto the exhaust pipe of the water
pump and place the pump in the large
terracotta bowl. The pump can be fixed
in place with the suction cups.
5. Lead the cable properly and make sure
it does not become a tripping hazard.
6. Fill the large bowl with water. Do not
use other liquids than water and do not
allow the pump to run dry. Do not put
fish, small animals or plants into the
bowls.
7. Use the ground stake with the support
(7) in order to fix it in the ground. Fix
the support at the rear side on the solar
module.
Using
8