Before First Use; Assembly - Westfalia 82 06 89 Instruction Manual

Before first Use

Dispose of packaging material or store it in a safe place. There is risk of
suffocation for small children!

Assembly

1. Set up the steel frame (1) in
the desired place on an even,
solid surface. Please keep in
mind that some water may
splash over the rim of a bowl,
do not set up the cascade
fountain on a surface which
may be damaged by water.
2. Place the bowls on the frame.
Place the bowls in such a way
that the spouts empty into the
next lower bowls.
3. Lead the water hose (4) on
the terracotta jug from below.
Lead the water hose if desired
through the small wire rings on
the steel frame (see red rings
on the picture).
4. Set the lower end of the water
hose onto the exhaust pipe of
the water pump and place the pump in the large terracotta bowl. The pump
can be fixed in place with the suction cups.
5. Lead the cable properly and make sure it does not become a tripping hazard.
6. Fill the large bowl with water. Do not use other liquids than water and do not
allow the pump to run dry. Do not put fish, small animals or plants into the
bowls.
7. Use the ground stake with the support (7) in order to fix it in the ground. Fix
the support at the rear side on the solar module.
Operation
8