PotteryBarn Hotel Medicine Cabinet Recessed Extra Large Assembly Instructions

Note: Professional installation required

Important safety instructions:

•
Please read all instructions carefully before assembling. For your safety, assembly by
two people is recommended.
•
The maximum individual shelf weight capacity is 20lbs. Do not exceed the load capacity.

Parts included:

(A) Cabinet (1pc)
(B) Glass Shelf
(4 pcs)

Hardware Included:

(C) Door Knob (2pcs)
Rubber Sheet (1 pc)

Pre-assembly:

•
Remove all parts from the box and lay out on a clear carpeted or scratch-free work
surface. (The shipping box provides an ideal work surface). This will avoid damaging any
parts during assembly. Do not dispose of any contents until assembly is complete to
avoid accidentally discarding small parts. Use the parts lists above to identify and
separate each of the pieces included.
•
Contact your local hardware store to determine the proper mounting hardware needed for
your wall type.
•
Keep all parts and plastic bags out of the reach of children.

Professional mounting instructions:

1. After measuring the recessed portion of cabinet, make a cut out in the wall
measuring 20.5"W x 3.625"D x 29.75"H.
2. Place the cabinet (A) into the wall. With a pencil, mark the location of the 4
mounting screw (E) holes. Use a carpenter's level (not included) to ensure that the
cabinet will be level.
3. Insert mounting screws (E) through the holes on the side panels of the cabinet (A).
Using a Phillips head screwdriver, screw the mounting screws into the wall stud or
wood support structure.
Note: Cabinet cannot be rotated to adjust door opening direction.
Hotel Medicine Cabinet Recessed – Extra Large
Assembly Instructions
Tools required (not
included):
Phillips head
screwdriver
Carpenter's level
Pencil
(D) L-Shape Peg (16 pcs) (E) Mounting Screw (4 pcs)
Page 1 of 3
(F)