PotteryBarn Hudson Daybed Manual

Pre-Assembly:

•
Please read all instructions carefully before assembly.
•
For your safety and ease to assembly the products by two people is recommended.
•
Carefully lay out and identify all parts and hardware prior to assembly.
•
Save all packing materials until assembly is complete to avoid accidentally discarding small parts or hardware.

Parts Included:

BOX 1:
Headboard (1pc)
BOX 3:
Side rails (2pcs )

Tools Needed:

• Philips screwdriver (not provided)

Hardware included:

•
(1) Allen Key (A)
• (6) 1/4"x3/4"Allen Bolts (B)
•
(6) 1/4"x10mmx2mm Spring Washer (C)
•
(6) 1/4"x16mmx1mm Flat Washer (D)
•
(32) #8x30mm Phillip head screws (E)

Assembly Instructions:

1. Attach each side rail to the end boards by dropping the hooked ends into the corresponding slots. Be sure the
ledges of the side rails are facing inward. Figure #1.
Hudson Daybed
BOX 2:
Footboard (1pc)
Slat roll (1pc)
Figure #1
Trundle front board (1pc)