PotteryBarn Cynthia Wardrobe Quick Start Manual

Pre-Assembly:

•
Please read all instructions carefully before beginning assembly
•
Save all packing materials until the wardrobe is fully assembled to avoid accidentally discarding any small
parts or hardware
•
Use the parts and hardware lists to identify and separate each of the components included

Parts Included:

(2) Shelf - A

Assembly Instructions:

1. Determine the desired height for the shelves (A) using the pre-drilled holes located within the wardrobe as a guide.
Insert the shelf pins (C) into the pre-drilled holes on two sides of the wardrobe until fully inserted. Carefully place the
shelves (A) onto the shelf pins (C). Make sure each shelf has 4 shelf pins supporting it from below.
2. Place the hanging rod (B) onto the two pre-attached wood blocks located on the side panels of wardrobe.
3. Assembly is complete.
B
Cynthia Wardrobe
(1) Hanging Rod - B
Hardware Enclose:
(8) Shelf Pin - C (2) Extra Glass Knob
with Nut
C
A