Table of Contents
Advertisement
2 . P A C K A G E L I S T
2.1. Package list
Ensure to check all parts are present:
Couverture
Couverture
e
liner
Pump unit
Couverture
Couverture
RCD plug
wrench
Caps
Repair kit
Couverture
Top cover
ground sheet
Pump unit connectors
3 . I N S T A L L A T I O N
WARNING : Spa installed on inadequately level surfaces are subject to leaking. forming irregulari-
ties or may collapse. which can result in property damage or serious injury for those in or around the
spa area!
CAUTION : Please choose your set-up area carefully as lawn and other desirable vegetation
undereath the ground sheet (if applicable) will die. Furthermore, try to avoid setting the ground sheet
in areas prone to aggressive plant and weed species, as they may grow through the ground sheet.
3.1. Site selection
WARNING : Before proceeding to install your spa, please ensure that the allocated
location meets the following conditions :
•
A level place in order to avoid any defect, hernia or leakage.
•
Wide enough to support the pool and its pump unit.
•
•
Sheltered from the sun and bad weather.
•
Clean and free from sharp objects.
•
Devoid of aggressive vegetation on the ground.
A place with an awning
Clean the place
3.2. RCD test
WARNING: The RCD plug must be tested before each use..
Do not use if RCD test fails and see chapter 6.1.
1. Insert the plug into the
2. Press the «RESET» button,
power outlet.
the indicator light turns red.
Grounding
section.
A level place
3. Press the «TEST» button,
4. Press the «RESET» button,
the indicator light turns off.
the indicator light turns red.
The RCD works properly.
EN
7
Advertisement
Table of Contents
