1. Manuals
  2. Brands
  3. Wave Manuals
  4. Hot Tub
  5. 17660 Series
  6. Installation and user manual

Wave 17660 Series Installation And User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION AND
USER'S MANUAL
READ CAREFULLY AND KEEP IT
FOR LATER REFERENCE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 17660 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Wave 17660 Series

Summary of Contents for Wave 17660 Series

  • Page 1 INSTALLATION AND USER’S MANUAL READ CAREFULLY AND KEEP IT FOR LATER REFERENCE...
  • Page 2 INSTALLATION AND USER’S MANUAL READ CAREFULLY AND KEEP IT FOR LATER REFERENCE...

  • Page 3: Important Safety Instructions

    WARNING IMPORTANT SAFETY INSTRUCTIONS For your own safety and that of your product, make sure to following the safety precautions below. READ ALL INSTRUCTIONS AND SAFETY WARNINGS IN THIS MANUAL Failure to follow the instruction may result in serious injury, property damage or death. Improper Failure to follow the warnings and instructions in this manual may result in installation or operation will void the warranty.

  • Page 4: Specifications

    1. SPECIFICATIONS In order to avoid the possibility of hyperthermia (heat stress) occurring it is recommended that the average 4 persons - Before entering a spa or hot tub the user should measure the water temperature with an accurate ther- Model mometer since the tolerance of water temperature regulating devices varies.

  • Page 5: Package List

    2. PACKAGE LIST 3. INSTALLATION WARNING : Spa installed on inadequately level surfaces are subject to leaking. forming irregulari- 2.1. Package list ties or collapses. which can result in properly damage or serious injury for those in or around the spa area! CAUTION : Please choose your set-up area carefully as lawn and other desirable vegetation Ensure to check all parts are present:...
  • Page 6 4. USAGE 3.3. Assembling 4.1. Control panel LED Display Temperature Increase Button Heat Button 3) Inspect spring inside valve Temperature in the upspring status base protector. connecting tube into SPA pool units Massage Button selector Temperature Decrease Button Temperature Lock Button units indicator pump on the socket .

  • Page 7: Maintenance

    5. MAINTENANCE 5.1. Water maintenance WARNING : A bad pool water quality can harm your health. Depending on the frequency and conditions of use: Note: least once a week. turn on at same time The pump does not stop heating until the current water temperature reaches the caution and it is imperative to refer to their instructions.

  • Page 8: Troubleshooting

    6. TROUBLE SHOOTING 5.3. Drainage and storage If air valve damages or leaks, please replace valve according to the steps followed. Drainage Check the stopper on the bottom of the pool and the drain cap. Remove the stopper on the bottom of the pool. Completely drain all water from the spa pool.

  • Page 9: Warranty

    Wave products have been inspected and found free of defects prior to leaving the If the screen displays an error code “Ex”, please refer to the table below. factory. Wave warrants this product against defects in material and workmanship for a period of time, Code Situation Problem...

Table of Contents