Huawei FusionServer Pro 1288X V5 Technical White Paper page 17

Table of Contents

Advertisement

Huawei FusionServer Pro 1288X V5 Server
Technical White Paper
Silkscreen
Issue 02 (2020-04-20)
Indicator/
Button
Power
button/
indicator
UID button/
indicator
Health status
indicator
Copyright © Huawei Technologies Co., Ltd.
Description
Power indicator:
● Off: The device is not powered on.
● Steady green: The device is powered on.
● Blinking yellow: The power button is locked.
The power button is locked when the iBMC
is starting.
● Steady yellow: The device is ready to power
on.
Power button:
● When the device is powered on, you can
press this button to gracefully shut down
the OS.
● When the device is powered on, holding
down this button for 6 seconds will forcibly
power off the device.
● When the power indicator is steady green,
you can press this button to power on the
device.
The UID button/indicator helps identify and
locate a device.
UID indicator:
● Off: The device is not being located.
● Blinking blue: The device has been located
and is distinguished from other devices that
have also been located.
● Steady blue: The device is being located.
UID button:
● You can turn on or off the UID indicator by
pressing the UID button on the panel or by
using the iBMC CLI or WebUI.
● You can press this button to turn on or off
the UID indicator.
● You can press and hold down this button for
4 to 6 seconds to reset the iBMC.
● Off: The device is powered off or is faulty.
● Blinking red at 1 Hz: A major alarm has
been generated on the system.
● Blinking red at 5 Hz: A critical alarm has
been generated on the system.
● Steady green: The device is operating
properly.
5 Hardware Description
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

V100r005

Table of Contents