Casio JD-6500 Service Manual & Parts List page 9

Using the FUNCTION Key
To view the function menu, press FUNCTION.
To select a function:
1. Use or to highlight the function you want to choose.
2. Press EXE.
If another function menu appears repeat steps 1 and 2.
To backstep to a previous display, press FUNCTION.
To exit the function menu, press AC/ON.
Setting the System Language
The unit can produce display messages in any one of ten language: English, Spanish, Italian, German, French,
Danish, Swedish, Dutch, Finnish, and Portuguese.
To set the system to another language:
1. Display the main menu.
2. Press FUNCTION, then use
3. Use or to highlight the language you want. Press EXE.
Also note the word "Language" is displayed in each language.
To Adjust the Display Contrast
1. Display the main menu.
2. To darken the figures on the display, press
To Switch the Key Input Tone On or Off
1. Display the main menu.
2. Use , , , and
3. Press FUNCTION. Then use
4. Use to highlight "Key Tone." Use
Auto Power Off Function
This function automatically switches off the power if you do not touch any of the unit's keys for about six minutes.
To restore power, press AC/ON.
If you do not touch any keys for six minutes while entering or editing data, setting the current time, or setting
an alarm time, power cuts off without storing the data.
If you have set an alarm to go off, and the unit has been shut down by auto power off, the alarm will sound
anyway at its appropriate time.
or to highlight "Language." Press EXE.
. To make them lighter, press
to highlight . Press EXE.
to highlight "Sound," Press EXE.
and to switch the key tone on and off. Press EXE.
— 7 —
.