Casio JD-6500 Service Manual & Parts List page 22

(3) To do data transfer
Please switch both units on, and make them enter the MENU1 mode. Thus you may start to
transfer all data of customer's unit to the receiving unit following the procedure shown below.
SLAVE UNIT
MENU 1
Caution!
This is TEST
AC
To Escape
Press AC KEY
1. Service Trans
2. TEST
AC. Esc
Service Trans
1. TRANS
AC. ESC
Receive OK!
Receiving
To Stop
failed
Press AC KEY
MENU 1
Rcv Error !
Note: The TEST means the short-circuit operation as shown in figure on the next page:
TEST Over 2 seconds
EXE
1
2. RCV
2
Receiving succeeded
Sending succeeded
— 20 —
MASTER UNIT
MENU 1
TEST
Over 2 seconds
Caution!
This is TEST
To Escape
Press AC KEY
EXE
1. Service Trans
2. TEST
AC. Esc
1
Service Trans
1. TRANS 2. RCV
AC. ESC
1
Now Sending!
To Stop
Press AC KEY
MENU 1
Send Error !
AC
Sending
failed