Resetting Your Bookman; Book Card Care - Franklin BOOKMAN SSA-2045 User Manual

Resetting Your BOOKMAN

If the BOOKMAN keyboard fails to re-
spond, or if its screen performs erratically,
first press
CLEAR
twice. If nothing happens, follow the steps
below to reset it.
Warning: Pressing the reset button with
more than very light pressure may perma-
nently disable your BOOKMAN. In addi-
tion, resetting BOOKMAN erases settings
and information entered into its built-in book,
and in an installed book card.
1. Hold and press
CLEAR
If nothing happens, try Step 2.
2. Use a paperclip to gently press
BOOKMAN's reset button.
The reset button is recessed in a pin-
sized hole on the back of BOOKMAN.
Troubleshooting BOOKMAN
• Make sure your book card, if any, is
installed correctly.
• Check that the book card's metal
contacts are dirt- and dust-free.
This unit may change operating modes due to
Electro-static Discharge. Normal operation of this
unit can be re-established by pressing the reset
key, , or by removing/replacing batteries.
ON/OFF
and then press
ON/OFF
• Do not touch the metal con-
tacts on the book cards.
ON/OFF Caution: Touching these electrical
contacts with statically charged
objects, including your fingers, could
erase information entered in a book
card or built-in book.
.
• Do not put excessive pressure
on the book cards.
• Do not expose the book cards
to heat, cold, or liquids.
15

Book Card Care