Epson DX5 X 1 Calibration And Maintenance page 15

2. 2. 2. 2. Clean Clean Clean Option: Option:
Clean Option: Option:
1) Click to set the carriage go back to the flash jetting position for jetting during printing;
2) Print pass is to set every XX pass, carriage go back to the flash jetting position for jetting;
3) Clean Mode is Flash Jetting;
4) There are three options in Clean Time, Fast means non-stop jetting, Normal means jetting for 0.5s,
, Long means jetting for 1s.
3. 3. 3. 3. Eclosion(Feather Eclosion(Feather Eclosion(Feather function): Eclosion(Feather
To blur the pass line, feather pass edge.
1) Option: Enable/Disable the feather function; 2) Type of Eclosion; 3) Value of Eclosion.
4. 4. 4. 4. Color Color Color Bar: Bar:
Color Bar: Bar:
1) Distance (mm): Setup for distance between the color bar and the picture;
2) Width (mm): Setup for the width of the whole color bars ;
3) Setup for the position of color bar (in the right/left/both side of the image ).
5. 5. 5. 5. Smart Smart Print:
Smart Print: Smart Print: Print:
Set up for automatically skip white.
6. 6. 6. 6. Auto Auto feed after printed:
Auto Auto feed feed feed after after after printed: printed: printed:
Set up for automatically feed media after printing(mm).
function): function): function):
15