Epson DX5 X 1 Calibration And Maintenance page 11

3) The second is on the right side of the first pass:
Second pass
First pass
Adjust method:
A. Loosen the 3 screws on the carriage plate:
Note: Note: Every Every time time after after
Note: Note: Every Every time time after after the
screws screws on on the the carriage carriage
screws screws on on the the carriage carriage plate.
pass. pass.
pass. pass.
3. Color offset: Color offset is to align all color in order to print good quality images.
Tip: Based on the "0" position, the color lines should totally matched with the Black line, if not, find the best one
showing on the printed out color offset, then input the corresponding values in the software. Note that values are
accumulated.
If the "0" position is not the perfect matching one, then we have to adjust the figure on the software. Go to Option
– Calibration Calibration Calibration Calibration – Color Color Color Color Offset Offset Offset Offset
:
the the adjustment, adjustment, before before
the adjustment, adjustment, before before print
plate. plate. Keep Keep adjusting adjusting
plate. Keep Keep adjusting adjusting until
B. Turn the screw anti-clockwise:
print print another another vertical vertical
print another another vertical vertical calibration,
until until the the second second pass pass is is is is perfectly pass
until the the second second pass
Values are input here.
11
calibration, calibration, it it it it is is is is required calibration, required required to to to to tighten required
perfectly perfectly aligned aligned with with
perfectly aligned aligned with with the
tighten 3 3 3 3 tighten tighten
the the first first
the first first
Option Option Option