Resetting Bookman; Specifications - Franklin BOOKMAN SCD-770 User Manual

Resetting BOOKMAN

If the BOOKMAN keyboard fails to re-
spond, or if its screen performs erratically,
first press and then press
CLEAR
If nothing happens, follow the steps below
to reset it.
Warning: Pressing the reset button with
more than very light pressure may perma-
nently disable your BOOKMAN. In addi-
tion, resetting BOOKMAN erases settings
and information entered into its built-in book,
and in an installed book card.
1. Hold and press
CLEAR
If nothing happens, try Step 2.
2. Use a paperclip to gently press
BOOKMAN's reset button.
The reset button is recessed in a pin-
sized hole on the back of BOOKMAN.
Troubleshooting BOOKMAN
• Make sure your book card, if any, is
installed correctly.
• Check that the book card's metal
contacts are dirt- and dust-free.
This unit may change operating modes due to
Electro-static Discharge. Normal operation of this
unit can be re-established by pressing the reset
key, , or by removing/replacing batteries.
ON/OFF
Model: SCD-770
• batteries: 2 AAA, 1.5-volt
• size: 14 x 8.9 x 1.6 cm
twice.
ON/OFF
• weight: 7 oz
© 1996 Franklin Electronic Publishers, Inc.,
Burlington, NJ 08016-4907 U.S. All rights
reserved.
© 1993 Merriam-Webster, Inc. All rights reserved.
© 1995 First Byte. All rights reserved.
"Merriam-Webster," "Collegiate Dictionary,"
"Knowledgebase," and "Wreath & Monogram"
are registered trademarks of Merriam-Webster,
.
Inc., and are herein pursuant to License.
ON/OFF
FCC Notice: Complies with the limits for a
Class B computing device pursuant to Sub-
part B of part 15 of FCC Rules. Operation is
subject to the following two conditions: (1)
This device may not cause harmful interfer-
ence; and (2) This device must accept any
interference received, including interference
that may cause undesired operation.
U.S. Patents 4,490,811; 4,830,618;
4,891,775; 4,406,626; 4,982,181; 5,113,340;
5,153,831; 5,203,705; 5,218,536; 5,229,936;
5,249,965; 5,295,070; 5,321,609; 5,333,313;
5,396,606; 5,007,019; European Patent 0
136 379; Reg. No. M 9409743.7 and
M 9409744.5. Pat. Pend.
ISBN 1-56712-289-2
23

Specifications