Operating The Throttle; Operating The Choke - Toro TimeCutter 5000C Operator's Manual

Disengaging the Blade-Control
Switch (PTO)
Figure 17

Operating the Throttle

You can move the throttle control between the F
and S positions (Figure
LOW
Always use the F position when engaging the PTO.
AST
Figure 18

Operating the Choke

Use the choke to start a cold engine.
1. Pull up the choke knob to engage the choke
before using the key switch
Note:
Ensure that you fully engage the choke.
You may need to hold the knob up when you
use the key switch.
2. Push down the choke to disengage the choke
after the engine has started
g009174
AST
18).
g187517
(Figure 19).
(Figure 19).
1. O position
N
21
Figure 19
2. O position
FF
g295540