Operating The Mower Blade-Control Switch (Pto) - Toro TimeCutter 5000C Operator's Manual

Hide thumbs Also See for TimeCutter 5000C:
Table of Contents

Advertisement

braking and steering. The machine can slide even
if the drive wheels are stopped.
Remove or mark obstacles such as ditches, holes,
ruts, bumps, rocks, or other hidden hazards. Tall
grass can hide obstacles. Uneven terrain could
overturn the machine.
Use extra care while operating with accessories or
attachments, such as grass-collection systems.
These can change the stability of the machine
and cause a loss of control. Follow directions for
counterweights.
If possible, keep the deck lowered to the ground
while operating on slopes. Raising the deck while
operating on slopes can cause the machine to
become unstable.
1. Safe Zone—use the
machine here on slopes
less than 15° or flat areas.
2. Danger Zone—use a
walk-behind mower and/or
a hand trimmer on slopes
greater than 15° and near
drop-offs or water.
3. Water
Towing Safety
Do not attach towed equipment except at the hitch
point.
Do not use the machine as a towing vehicle unless
it has a hitch installed.
Do not exceed the weight limits for towed
equipment and towing on slopes. The towed
weight must not exceed the weight of the machine
and operator.
Never allow children or others near the towed
equipment.
On slopes, the weight of the towed equipment may
cause loss of traction, increased risk of rollover,
Figure 14
4. W = Width of the machine
5. Keep a safe distance
(twice the width of the
machine) between the
machine and any hazard.
and loss of control. Reduce the towed weight and
slow down.
The stopping distance may increase with the
weight of a towed load. Travel slowly and allow
extra distance to stop.
Make wide turns to keep the attachment clear of
the machine.
Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the
mower blades and any powered attachments.
Engaging the Blade-Control
Switch (PTO)
g229111
Note:
Always engage the blades with the throttle in
the F
position
AST
20
Figure 15
(Figure
16).
Figure 16
g008945
g187516

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Timecutter 5475c7575375757

Table of Contents