Using A Password - Franklin NCS-101 User Manual

Using a Password

You can use a password to keep the information
in your phone list private. Your password will be
requested whenever anyone turns on the unit
and first presses
Warning! After you have set the password, it will
be required whenever you try to access the
phone list for the first time during a session. So
always record your password and keep it in a
separate location.
1. Press
PHONE
2. Use
press
3. Type a password and then press
Remember to write down your exact password
and keep it in a separate location.
4. To test the password, press
type the password, and then press
5. To disable the password, repeat Steps 1
and 2 above, and then press
Enter password appears.
About Automatic Shutoff
If you forget to turn off this product, it will au-
tomatically turn off in about two minutes.
PHONE
.
to see Set the password and then
.
ENTER
.
ON/OFF
10
.
ENTER
twice,
ENTER
when
ENTER
.