Download Print this page
KMART PARK PRO Instructions

KMART PARK PRO Instructions

Advertisement

Quick Links

PARK PRO SCOOTER INSTRUCTIONS
WARNING!
Assembly by an adult.
Always wear a helmet and protective pads. Do not use scooter at night. Do not
use on wet surfaces, uneven or unpaved road.Do not use on public roads.
This scooter is not designed for off-road use.
Not suitable for children under 7 years old. User's maximum weight: 100Kg.
This product complies with EN 14619.
Remove the scooter and all the parts from the box. Set out all the parts and read the
assembly instructions prior to use. Keep the packaging until assembly is complete.
General instructions
● This scooter must be assembled by a responsible adult. Prior to use, make sure that
the scooter has been assembled properly. Remove all the parts which are not necessary
for play before giving the scooter to your child. Due to the skill it requires, the scooter
must be used with care in order to avoid falls or collisions likely to injure the user or
others.
● To use with suitable protective equipment, including a helmet, shoes, elbow, wrist and
knee protectors.
● The scooter is not a toy for children under the age of 7 years.
● Advise to the user to check the limitation of use according to regulations of road safety.
Directions
a) The scooter can be dangerous and can lead to a traffic accident when used on public
highways. Not to be used on public roads.
b) It is best used on a flat, clean surface, free of gravel and grease.
c) Avoid bumps and drainage grates that may cause an accident.
d) The scooter does not include any headlights or lights. It is therefore not suitable for
use at night or during periods when visibility is limited.
e) Do not allow more than one child to ride the scooter at the same time.
Before and after use
- Check all screws and fittings are secure before giving to a child.
- Ensure all locking devices are engaged. Ensure there are no broken components.
Keycode: 42704379
1

Advertisement

loading

Summary of Contents for KMART PARK PRO

  • Page 1 PARK PRO SCOOTER INSTRUCTIONS Keycode: 42704379 WARNING! Assembly by an adult. Always wear a helmet and protective pads. Do not use scooter at night. Do not use on wet surfaces, uneven or unpaved road.Do not use on public roads. This scooter is not designed for off-road use.
  • Page 2 Assembly Instructions: 1. Loosen the clamp and slide the handlebar stem over the fork column until it touches the lock nut. 2. Tighten the upper bolt one quarter of a turn, the middle bolt one quarter of a turn and then the lower bolt one quarter of a turn using the hex key provided.
  • Page 3 - Braking: Brake is located at the rear, when necessary, press down on it to slow down. Press down gradually in order to prevent skidding or loss of stability. The metal or aluminum brake may heat up after multiple uses. Avoid touching it during and after use. - Shoes are mandatory and we strongly advise you to wear long pants and long sleeve shirts to avoid injury if you fall.