Advertisement
Assembly Instructions:
1. Loosen the clamp and slide the handlebar stem over the fork column until it touches
the lock nut.
2. Tighten the upper bolt one quarter of a turn, the middle bolt one quarter of a turn and
then the lower bolt one quarter of a turn using the hex key provided. Repeat until the
clamp is tight and the handlebars are secure.
3. Make sure the wheel faces forward when the handlebars are held facing straight.
WARNING! Failure to tighten the clamp fully will result in the handlebars not being
secure and the scooter will be unsafe to ride. Over tightening one bolt before the
other will make it impossible to tighten the clamp fully.
Use
- Hold both handgrips firmly. Put one foot towards the front of the deck, push off the
ground to propel the scooter forward with other foot. Both feet can fit on the deck when
desired speed has been reached.
- Practice foot positioning at slower speed until you build skill and experience. Shifting
your foot position, or lifting or placing your feet while travelling affects the stability of the
scooter. You have to learn to maintain control while you move your feet on and off the
deck of the scooter.
2
Advertisement
