Download Print this page

KMART JUNIOR NEO Instructions

Advertisement

Quick Links

JUNIOR NEO SCOOTER INSTRUCTIONS
WARNING!
Assembly by an adult.
Always wear a helmet and protective pads. Do not use scooter at night. Do not
use on wet surfaces, uneven or unpaved road. Do not use on public roads.
This scooter is not designed for stunting or off-road use.
Not suitable for children under 5 years old. User's maximum weight: 50Kg.
Remove the scooter and all the parts from the box. Set out all the parts and read the
assembly instructions prior to use. Keep the packaging until assembly is complete.
General instructions
● This scooter must be assembled by a responsible adult. Prior to use, make sure that
the scooter has been assembled properly. Remove all the parts which are not necessary
for play before giving the scooter to your child. Due to the skill it requires, the scooter
must be used with care in order to avoid falls or collisions likely to injure the user or
others.
● To use with suitable protective equipment, including a helmet, shoes, elbow, wrist and
knee protectors.
● The scooter is not a toy for children under the age of 5 years.
● Advise to the user to check the limitation of use according to regulations of road safety.
Directions
a) The scooter can be dangerous and can lead to a traffic accident when used on public
highways. Not to be used on public roads.
b) It is best used on a flat, clean surface, free of gravel and grease.
c) Avoid bumps and drainage grates that may cause an accident.
d) The scooter does not include any headlights or lights. It is therefore not suitable for
use at night or during periods when visibility is limited.
e) Do not allow more than one child to ride the scooter at the same time.
Before and after use
- Check all screws and fittings are secure before giving to a child.
- Ensure all locking devices are engaged. Ensure there are no broken components.
Keycode: 42814610
1

Advertisement

loading

Summary of Contents for KMART JUNIOR NEO

  • Page 1 JUNIOR NEO SCOOTER INSTRUCTIONS Keycode: 42814610 WARNING! Assembly by an adult. Always wear a helmet and protective pads. Do not use scooter at night. Do not use on wet surfaces, uneven or unpaved road. Do not use on public roads.
  • Page 2 - Spin each wheel make sure the wheel rotates smoothly indicating that the bearings are undamaged. Assembly Instructions: 1. Loosen the clamp on steering tube. Slide the tube onto the fork until it is touching the fork headset washers. 2. Tighten the upper bolt one quarter of a turn and the lower bolt one quarter of a turn using the hex key provided.
  • Page 3 Care Instructions A. Wheel bearings: Avoid going through water, oil or sand as this can damage wheel bearings. To look after the wheel bearings, systematically check that the wheels turn properly by turning the scooter upside-down and using your hand to spin the wheels. If the wheels do not spin they must then be removed to check their condition.

This manual is also suitable for:

42814610