KMART Ski Scooter Instructions

Download this manual

SKI SCOOTER INSTRUCTIONS

WARNING!

Read the information supplied by the manufacturer.

WARNING!

Assembly by an adult.

Always wear a helmet and protective pads. Do not use scooter at night. Do not

use on wet surfaces, uneven or unpaved road. Do not use on public roads.

This scooter is not designed for off-road use.

Not suitable for children under 7 years old. User's maximum weight: 100Kg.

This product complies with EN 14619.

Remove the scooter and all the parts from the box. Set out all the parts and read the

assembly instructions prior to use. Keep the packaging until assembly is complete.

General instructions

● This scooter requires adult assembly. Prior to use, make sure that the scooter has

been assembled properly. Due to the skill it requires, the scooter must be used with care

in order to avoid falls or collisions likely to injure the user or others.

Directions

a) The scooter can be dangerous and can lead to a traffic accident when used on public

highways. Not to be used on public roads.

b) It is best used on a flat, clean surface, free of gravel and grease.

c) Avoid bumps and drainage grates that may cause an accident.

d) The scooter does not include any headlights or lights. It is therefore not suitable for

use at night or during periods when visibility is limited.

e) Do not allow more than one child to ride the scooter at the same time.

Before and after use

- Check all screws and fittings are secure before giving to a child.

- Ensure all locking devices are engaged. Ensure there are no broken components.

- Ensure the wheels can be swung smoothly and the action decks are fixed well.

Keycode: 42642749

Page 1 SKI SCOOTER INSTRUCTIONS Keycode: 42642749 WARNING! Read the information supplied by the manufacturer. WARNING! Assembly by an adult. Always wear a helmet and protective pads. Do not use scooter at night. Do not use on wet surfaces, uneven or unpaved road. Do not use on public roads.
Page 2 Assembly Instructions: 1) The scooter folding and unfolding operations are to be performed by an adult. 2) During these operations, be careful not to pinch your fingers in the hinge and locking system. 3) Make sure that all the locking mechanisms are securely locked. Unfold the scooter 1.
Page 3 - Hold both handle grips firmly. Step on the action decks properly according to the below demonstration. - Swing your low body to the right, and the swing to the left. Repeat to do these actions, and then the scooter will move forward easily and continually. - Braking: Brake is located in the right, when necessary, press it to slow down.
Page 4 C. Modifications: The original product must by no means be modified except for the maintenance-related changes mentioned in these instructions. D. Nuts and axles: These should be checked regularly. They can become loose after a while in which case they should be tightened. They can become worn and not tightened properly, in which case they should be replaced.